Physical Values

Terminal No. (Wire color)		Description		Condition	Value (Approx.)
+	-	Signal name	Input/Output	Condition	Value (Approx.)
1 (BR)	Ground	AWD solenoid power supply	Output	Engine speed: At idle	0 V
1 (BR)	Ground	AWD solenoid power supply	Output	Engine speed: 3, 000 RPM or more constant	2.5 V *
2 (Y)	Ground	AWD solenoid ground	Input	Engine speed: At idle	0 V
2 (Y)	Ground	AWD solenoid ground	Input	Engine speed: 3, 000 RPM or more constant	0 V
3 (W)	Ground	Transfer fluid temperature sensor ground	Input	Always	0 V
7 (G)	Ground	Ignition switch	Input	Ignition switch: ON	Battery voltage
7 (G)	Ground	Ignition switch	Input	Ignition switch: OFF	0 V
8 (L)	-	CAN-H	Input/Output	-	-
9 (O)	Ground	Power supply (AWD solenoid)	Input	Always	Battery voltage
10 (B)	Ground	Ground	-	Always	0 V
11 (GR)	Ground	Ground	-	Always	0 V
13 (LG)	Ground	Transfer fluid temperature sensor power supply	Output	Transfer temperature: 20°C (68°F)	1.56 V
13 (LG)	Ground	Transfer fluid temperature sensor power supply	Output	Transfer temperature: 80°C (176°F)	0.44 V
15 (Y)	Ground	Power supply (AWD control unit)	Input	Always	Battery voltage
16 (P)	-	CAN-L	Input/Output	-	-

*: The values are changed by throttle opening and engine speed.

CAUTION:

When using circuit tester to measure voltage for inspection, be sure not to extend forcibly any connector terminals.