LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2015 >> QX50 Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Hybrid Control System - Introduction) >> Basic Inspection >> Additional Service When Replacing HPCM >> Work Procedure >> Diagnostic Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnostic Test

WARNING: This page is about a different car, the 2015 Infiniti Q70. However, it is still accessible from the selected car via links, so may be relevant.

  1. PERFORM INITIALIZATION OF IVIS (NATS) SYSTEM AND REGISTRATION OF ALL IVIS (NATS) IGNITION KEY IDS

    Perform initialization of IVIS (NATS) system and registration of all IVIS (NATS) ignition key IDs.

    Refer to WORK PROCEDURE .

    GO TO STEP 2  .

  2. PERFORM ACCELERATOR PEDAL RELEASED POSITION LEARNING

    Perform "Accelerator Pedal Released Position Learning".

    Refer to WORK PROCEDURE .

    GO TO STEP 3  .

  3. PERFORM CLUTCH 1 POSITION LEARNING

    Perform "Clutch 1 position learning".

    Refer to WORK PROCEDURE .

    END