LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2015 >> QX60 Base, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Cruise Control Systems >> Driver Assistance System (BSW And BSI) (Introduction And Wiring Diagrams) (Except Hybrid) >> System Description >> Blind Spot Intervention System >> System Description >> Bulb Check Action And Fail - Safe Indication.
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Bulb Check Action And Fail - Safe Indication.

Vehicle condition/Driver's operation Blind Spot Warning/Blind Spot Intervention
indicator
Warning
buzzer
Indication on the combination meter
When DTC is detected OFF Beep
GNSALOIA0137GB-137Courtesy of NISSAN NORTH AMERICA, INC.
When radar blockage is detected OFF Beep Unavailable: Side Radar Obstruction
When the camera detects that the interior temperature is high OFF Beep Unavailable: High Cabin Temp.
When the dynamic driver assistance switch is turned ON with settings of DCA system, LDP system and Blind Spot Intervention system OFF OFF - Blink (Approx. 3 sec.)
GNSALOIA0132GB-132Courtesy of NISSAN NORTH AMERICA, INC.

: Blinking cycle when the side radar blockage condition or lane camera unit high temperature condition 

Fig 1: Side Radar Blockage Condition Blinking Cycle
G07018625Courtesy of NISSAN NORTH AMERICA, INC.
NOTE:

Time shown in the figure is approximate time.