Diagnosis System (Av Control Unit): Description

The AV control unit on board diagnosis includes the following functions:

• A/C and AV switch assembly self diagnosis that checks the ON/OFF operation (continuity) of each switch in the A/C and AV switch assembly.
  NOTE:

  The hazard switch and disk eject switch are not included in this operation check.

• AV control unit on board diagnosis performs the following functions listed in the table below:

  Mode		Description
  Self Diagnosis		AV control unit diagnosis. Diagnoses the connections across system components (between AV control unit and each unit).
  Confirmation/Adjustment	Display Diagnosis	Color tone check using color spectrum bar display and white display. Light and shade check by gradation bar display.
  	Vehicle Signals	Diagnosis of signals can be performed for vehicle speed, parking brake, lights, ignition and reverse.
  	Speaker Test	Speaker connection can be confirmed by test tone.
  	Error History	The system malfunction and frequency of past occurrences is displayed. When malfunctioning item is selected, time and place that the malfunction last occurred are displayed.
  	Camera Cont.	Guiding line position that overlaps rear view camera image can be adjusted. Configuration stored in the AV control unit can be checked.
  	Vehicle CAN Diagnosis	Transmit/receive function of CAN communication can be monitored.
  	AV COMM Diagnosis	Communication condition of each unit of Multi AV system can be monitored.
  	Delete Unit Connection Log	Erase connection history of unit and error history.
  	Initialize Settings	Initializes the AV control unit memory.

Perform CONSULT diagnosis if the AV control unit on board diagnosis does not start, the screen does not display anything, or the A/C and AV switch assembly self diagnosis does not function.