How To Set
with Consult:
Perform The "Clean Sw Set" Of Hvac Work Support Item.
| Work Support Items | Display | Setting |
|---|---|---|
| Clean Sw Set | Mode1 | Initial Setting |
| Mode2 | Setting 1 | |
| Mode3 | Setting 2 | |
| Mode4 | Setting 3 |
| Initial Setting | When The Auto Intake Switch Is On, The A/C Switch Is Also Turned On In Synchronization With The Auto Intake Switch. Control Of The Auto Intake Switch Is Functional Even When The A/C Switch Is Turned Off. |
|---|---|
| Setting 1 | When The Auto Intake Switch Is On, The A/C Switch Is Not Turned On In Synchronization With The Auto Intake Switch. Control Of The Auto Intake Switch Is Functional Even When The A/C Switch Is Turned Off. |
| Setting 2 | When The Auto Intake Switch Is On, The A/C Switch Is Also Turned On In Synchronization With The Auto Intake Switch. When The A/C Switch Is Turned Off, The Auto Intake Switch Is Turned Off In Synchronization With The A/C Switch. |
| Setting 3 | Auto Intake Switch Can Be Turned On Only When A/C Switch Is On. When The A/C Switch Is Turned Off, The Auto Intake Switch Is Turned Off In Synchronization With The A/C Switch. |
NOTE:
When The Battery Cable Is Disconnected From The Negative Terminal Or When The Battery Voltage Becomes 10 V Or Less, The Setting Of Work Support May Be Cancelled.