DTC Detection Logic

NOTE:

If DTC B210D is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to DTC LOGIC .
If DTC B210D is displayed with DTC B2617, first perform the trouble diagnosis for DTC B2617. Refer to DTC LOGIC .

DTC No.	Trouble Diagnosis Name	DTC Detecting Condition	Possible Cause
B210D	STARTER RLY ON CIRC	IPDM E/R detects that the relay is stuck in the ON position even if the followings condition are met for about 1 second. Starter control relay ON/OFF signal from BCM Transmission range switch input	Harness or connectors (The CAN communication line is open or shorted.) IPDM E/R