LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2015 >> QX80 Base, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Warning Systems >> Intelligent Cruise Control System (ICC) >> System Description >> System >> Conventional (Fixed Speed) Cruise Control Mode Function >> System Description >> Operation Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Operation Description

To turn ON the conventional (fixed speed) cruise control mode, push and hold the MAIN switch for longer than approximately 1.5 seconds when ICC system is OFF.

When pushing the MAIN switch ON, the ICC system display and the MAIN switch indicator are displayed on the information display.

After hold the MAIN switch ON for longer than approximately 1.5 seconds, the ICC system display goes out.

The MAIN switch indicator stays lit and brings the system to standby state.

NOTE:
  • To turn on the vehicle-to-vehicle distance control mode again, turn OFF the system and quickly push (less than 1.5 seconds) the MAIN switch.
  • When the DCA system is ON, the conventional (fixed speed) cruise control mode cannot be turned on even though the MAIN switch is pushed and held.
  • To turn ON the conventional (fixed speed) cruise control mode, turn OFF the DCA system. Refer to SYSTEM DESCRIPTION .

ADAS control unit performs the control as per the following:

Constant speed Comparing the set vehicle speed with the current vehicle speed, transmits the command to ECM via CAN communication to reach the set vehicle speed, and controls electronic throttle control actuator.
scientia non olet · About LEMON Manuals