Remote Engine Start Function - Engine Start Procedures
Press LOCK button of Intelligent Key, and then within five seconds, press and hold REMOTE ENGINE START button of Intelligent Key for two seconds or more. Engine starts. Engine does not start while the vehicle is in the following status.
- All doors are UNLOCK or any door is open.
- Hood is open.
- A registered Intelligent Key is in passenger room.
- Shift position is other than P.
- Vehicle security alarm is in operation
- Hazard lamp is in operation.
NOTE:
- Engine operation status described in the following 2 types
- Normal engine run mode: Ordinary operation status of engine. Driving is allowed.
- Remote engine run mode: Operation status of engine according to REMOTE ENGINE START button operation of Intelligent Key. Driving is not allowed.
- During remote engine run mode, the following display is indicated on information display in combination meter.
Display Display ON condition Display OFF condition During remote engine run mode Mode switch to normal engine run mode from remote engine run mode - While engine is in operation by Intelligent Key, engine status changes from remote engine run mode to normal engine run mode when push-button ignition switch is operated while brake pedal is depressed. The vehicle becomes available to drive.