Manual Mode

INPUT/OUTPUT SIGNAL CHART

Item	Signal	TCM function	Actuator
Output speed sensor	Vehicle speed	Manual mode	High and low reverse clutch solenoid valve Direct clutch solenoid valve Input clutch solenoid valve Low brake solenoid valve 2346 brake solenoid valve Front brake solenoid valve Torque converter clutch solenoid valve Line pressure solenoid valve Anti-interlock solenoid valve
A/T fluid temperature sensor	ATF temperature
ECM	Engine speed signal*
ECM	Accelerator pedal position signal*
Combination meter	Manual mode signal*
	Non-manual mode signal*
	Manual mode shift up signal*
	Manual mode shift down signal*

*: This signal is transmitted via CAN communication line.

The TCM receives the manual mode signal, non-manual mode signal, manual mode shift up signal and manual mode shift down signal from combination meter via CAN communication line. The TCM shifts shift pattern control to the manual mode based on these signals, and then shifts the A/T by operating each solenoid valve according to the shift operation of the driver.
The TCM prohibits the manual mode while being in fail-safe mode due to an A/T malfunction, etc. Refer to FAIL-SAFE .