LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2015 >> QX80 Base, AWD >> Repair and Diagnosis (Single Page) >> Transmission >> Transfer Case >> Ecu Diagnosis Information >> Transfer Control Unit >> Reference Value >> Values On The Diagnosis Tool
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Values On The Diagnosis Tool

NOTE:

The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.

Monitor item Condition Value/Status
4WD MODE Ignition switch: ON 4WD is booting BOTNG
4WD mode is switching SWTNG
4WD mode: 4L 4L
4WD mode: 4H 4H
4WD mode: AUTO AUTO
2WD SWITCH * 1 Always Off
AUTO SWITCH 4WD shift switch: AUTO On
4WD shift switch: 4H or 4L Off
4H SWITCH 4WD shift switch: 4H On
4WD shift switch: AUTO or 4L Off
4L SWITCH 4WD shift switch: 4L On
4WD shift switch: AUTO or 4H Off
T/M RANGE A/T shift selector: D D
A/T shift selector: N N
A/T shift selector: R R
A/T shift selector: P P
N RANGE SW A/T shift selector: N On
A/T shift selector: Except N Off
R RANGE SW A/T shift selector: R On
A/T shift selector: Except R Off
IGN SW Ignition switch: ON On
Ignition switch: OFF Off
TCS OPER SW TCS is operating On
TCS is not operating Off
VDC OPER SW VDC is operating On
VDC is not operating Off
ABS OPER SW ABS is operating On
ABS is not operating Off
SAND MODE IND* 2 Always Off
ROCK MODE IND* 2 Always Off
SNOW MODE IND* 2 Always Off
ON ROAD MODE IND* 2 Always On
SAND MODE SW* 3 Always Off
ROCK MODE SW* 3 Always Off
SNOW MODE SW* 3 Always Off
ON ROAD MODE SW* 3 Always On
HI-LO POSI SEN 3 4WD mode: AUTO or 4H On
4WD mode: Shifting Off
4WD mode: 4L Off
HI-LO POSI SEN 1 4WD mode: AUTO or 4H On
4WD mode: Shifting On
4WD mode: 4L Off
LOCK POSI SEN When lock sleeve is opening OPEN
When lock sleeve locking LOCK
When transfer lock position sensor signal circuit is short. (Battery short) BAT
When transfer lock position sensor is unlearned. UNLEAN
When the temperature of transfer lock position sensor is high. HI TMP
When transfer lock position sensor is malfunctioning. ERROR
When transfer lock position sensor signal circuit is short. (Ground short) GND
ATP IND ATP warning lamp: ON On
ATP warning lamp: OFF Off
4WD FAIL LAMP 4WD warning lamp: ON On
4WD warning lamp: OFF Off
4WD MODE IND 4WD shift switch: AUTO AUTO
4WD shift switch: 4H LOCK
4WD shift switch: 4L 4L
MOTOR DRIVE B When transfer motor is driving in reversal. (100% duty controlled) HI
When transfer motor is driving or stopping. LO
When transfer motor is driving in reversal. (PWM output) PWM
MOTOR DRIVE A When transfer motor is driving. (100% duty controlled) HI
When transfer motor is driving in reversal or stopping. LO
When transfer motor is driving. (PWM output) PWM
FLUID TEMP SE The temperature of transfer fluid is 20 - 80°C. Approx. 1.1 - 0.3 V
MOTOR TEMP The temperature of transfer motor is 20 - 80°C. Approx. 1.1 - 0.3 V
C/U POWER SUP Always Battery voltage
MOTOR POWER SUP Always Battery voltage
ROTARY POSI SEN 4WD mode: AUTO
A/T shift selector: D
Depress the accelerator pedal several times. Value is changing
THRTL POS SEN When depressing accelerator pedal
(Value rises gradually in response to throttle position)
0 - 100 %
AT R SPEED Vehicle stopped 0.00 km/h (0.00 mph)
Vehicle driving (4WD mode: AUTO)
CAUTION:

Check air pressure of tire under standard condition.

Approx. equal to the indication on speedometer (inside of +-10 %)
T/M GEAR A/T shift selector: D
Vehicle driving
1
2
3
4
5
6
7
COMPR VHCL SPEED Vehicle stopped 0.00 km/h (0.00 mph)
Vehicle driving
CAUTION:

Check air pressure of tire under standard condition.

Approx. equal to the indication on speedometer (inside of +-10 %)
VHCL/S SEN-FR Vehicle stopped 0.00 km/h (0.00 mph)
Vehicle driving
CAUTION:

Check air pressure of tire under standard condition.

Approx. equal to the indication on speedometer (inside of +-10 %)
VHCL/S SEN-RR Vehicle stopped 0.00 km/h
Vehicle driving
CAUTION:

Check air pressure of tire under standard condition.

Approx. equal to the indication on speedometer (inside of +-10 %)
ENGINE SPEED Engine: Running Approx. equal to the indication on tachometer (inside of +-10 %)
INTRNL SPEED SEN 4WD mode: AUTO
A/T shift selector: D
Depress the accelerator pedal several times. Value is changing
TRANSFER TORQUE 4WD shift switch: AUTO 0 - 2250 N•m
4WD shift switch: 4H 0 - 2250 N•m
4WD shift switch: 4L 0 Nm
UNIT PARAMETER Always A1 - A9
B1 - B9
C1 - C9
D1 - D9
E1 - E9
F1 - F9
G1 - G9
H1 - H9
J1 - J9

*1: 4WD shift switch (2WD) is not equipped, but it is displayed.

*2: This indicator is not equipped, but it is displayed.

*3: This switch is not equipped, but it is displayed.