LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2015 >> QX80 Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Anti-Theft Systems >> Security Control System >> DTC/Circuit Diagnosis >> DTC B209F: Cranking Request Circuit >> DTC Logic >> DTC Detection Logic
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Detection Logic

NOTE:
  • DTC B209F can be detected even though the related circuit is not used in this vehicle.
  • If DTC B209F is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to DTC LOGIC .
DTC No. Trouble diagnosis name DTC detecting condition Possible cause
B209F CRANK REQ CIR OPEN When the following items do not match, a malfunction is detected.
  • Cranking request signal from ECM
  • Starter control relay control signal from ECM (CAN)
  • Harness or connectors

    (CAN communication line is open or shorted.)

  • Harness or connectors

    (Cranking request signal circuit is open or shorted.)

  • IPDM E/R
  • ECM

DTC CONFIRMATION PROCEDURE

  1. PERFORM DTC CONFIRMATION PROCEDURE

    1. Start engine and wait 1 second or more at idle speed.
    2. Drive vehicle for 1 second or more.
    3. Check DTC in "Self Diagnostic Result" mode of "IPDM E/R" using CONSULT.

    Is DTC detected?

    YES 

    Refer to DIAGNOSIS PROCEDURE .

    NO 

    INSPECTION END

scientia non olet · About LEMON Manuals