Physical Values

Terminal No. (Wire color)		Description		Condition		Value (Approx.)
+	-	Signal name	Input/Output	Condition		Value (Approx.)
6 (BR)	Ground	Hi-Lo position sensor 1	Input/Output	Engine: Running (Never drive the vehicle.)	4WD mode: AUTO or 4H	0 V
					4WD mode: Shifting	0 V
					4WD mode: 4L	5 V
7 (Y)	Ground	Transfer fluid temperature sensor power supply	Input	Engine: Running		0 - 5 V
9 (G)	Ground	Transfer internal speed sensor (GND)	-	Always		0 V
10 (Y/G)	Ground	Transfer internal speed sensor (IMP)	Input	Ignition switch: ON	4WD mode: AUTO A/T shift selector: N Transfer motor: Driving	Courtesy of NISSAN NORTH AMERICA, INC.
11 (V)	Ground	4WD shift SW (4L)	Input	Ignition switch: ON	4WD shift switch: 4L	Battery voltage
11 (V)	Ground	4WD shift SW (4L)	Input	Ignition switch: ON	4WD shift switch: Except 4L	0 V
12 (L)	-	CAN-H	Input/Output	-		-
13 (P)	-	CAN-L	Input/Output	-		-
14 (W/R)	Ground	4WD shift SW (AUTO)	Input	Ignition switch: ON	4WD shift switch: AUTO	Battery voltage
14 (W/R)	Ground	4WD shift SW (AUTO)	Input	Ignition switch: ON	4WD shift switch: Except AUTO	0 V
15 (P/B)	Ground	Transfer rotary position sensor (PWM)	Input	Ignition switch: ON	4WD mode: AUTO A/T shift selector: N	Courtesy of NISSAN NORTH AMERICA, INC.
16 (LG)	Ground	Transfer rotary position sensor (GND)	-	Always		0 V
17 (W/L)	Ground	Transfer lock position sensor power supply	Input	Ignition switch: ON		5 V
17 (W/L)	Ground	Transfer lock position sensor power supply	Input	10 seconds or more later after ignition switch turned OFF		0 V
18 (BR/Y)	Ground	Transfer rotary position sensor power supply	Input	Ignition switch: ON		5 V
18 (BR/Y)	Ground	Transfer rotary position sensor power supply	Input	10 seconds or more later after ignition switch turned OFF		0 V
20 (GR)	Ground	Transfer control unit power supply	Input	Always		Battery voltage
25 (P/L)	Ground	Hi-Lo position sensor 3	Input/Output	Engine: Running (Never drive the vehicle.)	4WD mode: AUTO or 4H	0 V
					4WD mode: Shifting	5 V
					4WD mode: 4L	5 V
28 (W)	Ground	Transfer motor temperature sensor power supply	Input	Ignition switch: ON		0 - 5 V
28 (W)	Ground	Transfer motor temperature sensor power supply	Input	Ignition switch: OFF		0 V
29 (LG/R)	Ground	Hi-Lo position sensor 2	Input/Output	Engine: Running (Never drive the vehicle.)	Always	0 V
30 (R/B)	Ground	Transfer lock position sensor (GND)	-	Always		0 V
31 (L/O)	Ground	Transfer internal speed sensor (DIR)	Input	Ignition switch: ON	4WD mode: AUTO A/T shift selector: N When changing the transfer motor rotation direction.	Courtesy of NISSAN NORTH AMERICA, INC.
32 (BR/R)	Ground	Ignition switch	Input	Ignition switch: ON		Battery voltage
32 (BR/R)	Ground	Ignition switch	Input	Ignition switch: OFF		0 V
35 (R)	Ground	4WD shift SW (4H)	Input	Ignition switch: ON	4WD shift switch: 4H	Battery voltage
35 (R)	Ground	4WD shift SW (4H)	Input	Ignition switch: ON	4WD shift switch: Except 4H	0 V
36 (L/R)	Ground	Transfer fluid temperature sensor (GND)	-	Always		0 V
38 (G/O)	Ground	Transfer lock position sensor signal	Input	Ignition switch: ON	4WD mode: AUTO A/T shift selector: N	Courtesy of NISSAN NORTH AMERICA, INC.
39 (R/W)	Ground	Transfer internal speed sensor power supply	Input	Ignition switch: ON		8 V
39 (R/W)	Ground	Transfer internal speed sensor power supply	Input	Ignition switch: OFF		0 V
41 (W/R)	Ground	Transfer control actuator power supply	Input	Always		Battery voltage
43 (G/R)	Ground	Motor drive B	Input/Output	Transfer motor: Driving		0 V - Battery voltage
44 (B)	Ground	GND	-	Always		0 V
45 (G/Y)	Ground	Motor drive A	Input/Output	Transfer motor: Driving		0 V - Battery voltage
46 (B)	Ground	Transfer control actuator (GND)	-	Always		0 V

CAUTION:

When using circuit tester to measure voltage for inspection, be sure not to extend forcibly any connector terminals.