LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2015 >> QX80 Base, RWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Intelligent Cruise Control System (ICC) >> System Description >> System >> Conventional (Fixed Speed) Cruise Control Mode Function >> System Description >> Set Condition
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Set Condition

The system control is started by pressing SET/COAST switch when the system is in standby state and the vehicle speed is between approximately 40 to 144 km/h (25 to 90 MPH).

If the system is canceled by conditions 1-7 below, the system will resume control at the last set cruising speed by pushing the RESUME/ACCELERATE switch.

Cancel conditions

  1. When CANCEL switch is pressed.
  2. When brake pedal depressed.
  3. When the vehicle slows down more than 13 km/h (8 MPH) below the set speed.
  4. When the selector lever is not in the "D" position or manual mode.
  5. When the parking brakes are applied.
  6. When the MAIN switch is turned OFF.
  7. When VDC (including the TCS) operates.
  8. When a wheel slips.
  9. When the system malfunction occurs.
scientia non olet · About LEMON Manuals