LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2015 >> QX80 Base, RWD >> Repair and Diagnosis (Single Page) >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heater & Air Conditioning Control System >> System Description >> Operation >> Rear Automatic Air Conditioning System >> Switch Name And Function >> Front Controller Operation - Switch Operation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Controller Operation - Switch Operation

AUTO switch Turns the switch indicator lamp and "AUTO" indicator on the front display ON, and then rear air conditioning system becomes the following state.
  • Air outlet: Automatic control
  • Blower fan: Automatic control
Fan switch (UP/DOWN) Rear blower fan speed is manually controlled with these switches. Seven speeds are available for manual control (as shown on the display screen)
NOTE:

When fan switch is pressed while rear air conditioning system is in automatic control ("AUTO" is indicated), automatic control is released ("AUTO" turns OFF).

MODE switch Selects air outlet sequentially from VENT → B/L → FOOT → VENT each time.
NOTE:

When MODE switch is pressed while rear air conditioning system is in automatic control ("AUTO" is indicated), automatic control is released ("AUTO" turns OFF).

OFF switch
  • Turns rear air conditioning system OFF. (When rear control mode is ON)
  • When rear air conditioning system turns OFF, air outlet become the automatic control.
REAR switch
  • Turns the switch indicator lamp and rear control mode on the front display ON, and then rear air conditioning system becomes the following state.
    • Air outlet: Automatic control
    • Blower fan: Automatic control
  • Rear control mode is released when switch is pressed again (rear air conditioning system operates continuously).
Temperature control dial (driver side)
  • Selects set temperature within a range between 18.0°C (60°F) - 32.0°C (90°F) at a rate of 0.5°C (1°F) each time the dial is rotated.
    • Clockwise rotation: Set temperature increases.
    • Counterclockwise rotation: Set temperature decreases.