LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2016 >> Q50 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 302 (Telematics System) >> System Description >> Diagnosis System (TCU) >> CONSULT Function >> Data Monitor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Data Monitor

WARNING: This page is about a different car, the 2019 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.

Display item

Display

Condition

Note

HF TYPE

NO BT

--

Indicates state of configuration result.

NOTE: This item is displayed, but not used.

AUDIO UNIT TYPE

NAVI

--

CALL SWITCH TYPE

SOS/OP

--

SPEAKER TYPE

INDRCT

--

ZONE

USA/CAN

--

CHANNEL

INFINITI

--

CAN COMM

GEN.3

--

AV COMM

ENABLE/DISABLE

--

K-LINE

ENABLE/DISABLE

--

VEHICLE TYPE

ENG

--

ECHO CANCEL

TYPE 1

--

This item is displayed, but cannot be monitored.

TYPE 2

TYPE 3

TYPE 4

NOISE CANCEL

TYPE 1

--

This item is displayed, but cannot be monitored.

TYPE 2

TYPE 3

TYPE 4

TCU STANDBY TIME

14DAYS

Set at 14 days (default)

Set value for continued operation time to control battery consumption

2DAYS

Set at 2 days

30DAYS

Set at 30 days

NON

No setting

SENSOR ANGLE X

--

--

Indicates state of configuration result.

NOTE: This item is displayed, but not used.

SENSOR ANGLE Y

--

--

SENSOR ANGLE Z

--

--

SVTB

--

--

REMOTE DOOR LOCK

ENABLE/DISABLE

--

REMOTE HORN & LAMP

ENABLE/DISABLE

--

REMOTE START

ENABLE/DISABLE

--

NAD OUTPUT STATUS

On

When TCU activation is ON

NAD: Abbreviation of Network Access Device.

ON/OFF setting of radio wave

Off

When TCU activation is OFF

ACN COMM SEQUENCE LOG

--

--

--

SOS COMM SEQUENCE LOG

--

--

--

SOS SWITCH

On

Telematics switch is ON

--

Off

Telematics switch is OFF