April 5, 2026: LEMON Manuals is launched! Read the announcement.

ADAS Control Unit 2 Input/Output Signal Item

WARNING: This page is about a different car, the 2019 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.

Input Signal Item

Reception unit	Transmit unit	Signal name			Description
ADAS control unit 2	ABS actuator and electric unit (control unit) (Via ADAS control unit)	CAN communication	Vehicle speed signal (ABS)		Receives wheel speeds of four wheels
ADAS control unit 2	BCM (Via ADAS control unit)	CAN communication	Turn indicator signal		Receives an operational state of the turn signal lamp and the hazard lamp
ADAS control unit 2	Display control unit (Via ADAS control unit)	CAN communication	System selection signal		Receives a selection state of each item in "Driving Aids" selected with the integral switch
ADAS control unit 2	Lane camera unit	Chassis communication	Detected lane condition signal		Receives detection results of lane marker

Output Signal Item

Reception unit	Transmit unit	Signal name			Description
Combination meter (Via ADAS control unit)	ADAS control unit 2	CAN communication	Meter display signal	LDW system display signal	Transmits a meter display signal to turn ON the LDW system display
Lane camera unit	ADAS control unit 2	Chassis communication	Vehicle speed signal		Transmits a vehicle speed calculated by ADAS control unit 2
			Turn indicator signal		Transmits a turn indicator signal received from BCM
Steering vibration motor	ADAS control unit 2	Motor operation signal			Activates a motor operation signal to activate the steering vibration motor.