LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2016 >> Q50 Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Power Control System (Power Distribution System) (Hybrid)) >> System Description >> System >> Fail-Safe >> Fail-Safe Control By DTC
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fail-Safe Control By DTC

WARNING: This page is about a different variant/trim than selected.

BCM performs fail-safe control when any DTC are detected.

Display contents of CONSULT Fail - safe Cancellation
B2192: ID DISCORD BCM-ECM * Inhibit setting the vehicle to READY Erase DTC
B2193: CHAIN OF BCM-ECM * Inhibit setting the vehicle to READY Erase DTC
B2195: ANTI-SCANNING Inhibit setting the vehicle to READY Ignition switch ON → OFF
B2198: NATS ANTENNA AMP Inhibit setting the vehicle to READY Erase DTC
B261E: VEHICLE TYPE Inhibit setting the vehicle to READY When HPCM status signal (CAN) is received normally from HPCM
B26F1: IGN RELAY OFF Inhibit setting the vehicle to READY When the following conditions are fulfilled
  • Ignition switch ON signal (CAN: Transmitted from BCM): ON
  • Ignition switch ON signal (CAN: Transmitted from IPDM E/R): ON
B26F2: IGN RELAY ON Inhibit setting the vehicle to READY When the following conditions are fulfilled
  • Ignition switch ON signal (CAN: Transmitted from BCM): OFF
  • Ignition switch ON signal (CAN: Transmitted from IPDM E/R): OFF
B26F7: BCM Inhibit setting the vehicle to READY by Intelligent Key system When room antenna and trunk room antenna functions normally
NOTE:

* : "ECM" is indicated on CONSULT display, however this means HPCM.

scientia non olet · About LEMON Manuals