DTC Related Item (Hybrid Control System)

WARNING: This page is about a different variant/trim than selected.

ECM transmits a self-diagnosis signal (each fail safe mode request) to HPCM via CAN communication, when applicable DTC are detected.

NOTE:

Refer to FAIL-SAFE , about fail safe mode of HYBRID CONTROL SYSTEM for detail.

DTC No.	Description	Fail-safe mode
U0293, P0201, P0202, P0203, P0204, P0205, P0206, P0605, P0607, P1236, P2119, P31A5	ECM transmits a self-diagnosis signal (fail safe mode request of motor driving) to HPCM via CAN communication, when applicable DTC are detected.	Motor driving
P0011, P0014, P0021, P0024, P0101, P0102, P0103, P010B, P010C, P010D, P0117, P0118, P0122, P0123, P0130, P0197, P0198, P0222, P0223, P0227, P0228, P0300, P0301, P0302, P0303, P0304, P0305, P0306, P0335, P0340, P0345, P0605, P0643, P1078, P1084, P1217, P1233, P1236, P1238, P1290, P2096, P2097, P2098, P2099, P2100, P2101, P2103, P2118, P2119, P2132, P2133	ECM transmits a self-diagnosis signal (fail safe mode request of limiting engine speed and idling stop inhibit) to HPCM via CAN communication, when applicable DTC are detected.	Limiting engine speed Idling stop is prohibited.
P0075, P0078, P0081, P0084, P0112, P0113, P0125, P0127, P0171, P0172, P0174, P0175, P0441, P0443, P0444, P0445, P0447, P0448, P0452, P0453	ECM transmits an idle stop inhibit request signal to HPCM via CAN communication, when applicable DTC are detected.	Idling stop is prohibited.