Data Monitor

NOTE:

The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.

Monitor item	Description
VEHICLE SPEED [km/h]	Vehicle speed that is calculated by vehicle speed signal received from the ABS actuator control unit is displayed.
SONAR C/U POWER SUPPLY [V]	Ignition power supply voltage received by sonar control unit is displayed.
SENSOR VOLTAGE [V]	Drive voltage transmitted to each corner sensor is displayed.
DETECTION MODE [Mode 1/Mode 2]	Indicates condition of display detection mode.
SW OPRT AFTR IGN ON [Yes/No]	Indicates condition of switch operation after ignition ON signal.
SONAR TEMPORARY OFF [Yes/No]	Indicates condition of sonar system.
SONAR PERMANENT OFF [Yes/No]	Indicates condition of sonar system.
P N RANGE [On/Off]	Status of P or N position received from TCM is displayed.
LED [On/Off]	Indicates condition of LED.
TRAILER CONNECT [N CON/CON]	Indicates condition of trailer connector.
REVERSE RANGE [On/Off]	Status of R position received from TCM is displayed.
SHRT DST FRM RR SENS [cm]	Indicates distance to obstacle.
SHRT DST FRM FR SENS [cm]	Indicates distance to obstacle.
COR[RL] [cm]	Indicates distance to obstacle.
COR[FL] [cm]	Indicates distance to obstacle.
COR[RR] [cm]	Indicates distance to obstacle.
COR[FR] [cm]	Indicates distance to obstacle.
CEN[RL]/CEN[R] [cm]	Indicates distance to obstacle.
CEN[FL]/CEN[F] [cm]	Indicates distance to obstacle.
CEN[RR] [cm]	Indicates distance to obstacle.
CEN[FR] [cm]	Indicates distance to obstacle.
RVRB TIME COR[RL] [ms]	Indicates distance to obstacle.
RVRB TIME COR[RR] [ms]	Indicates distance to obstacle.
RVRB TIME COR[FL] [ms]	Indicates distance to obstacle.
RVRB TIME COR[FR] [ms]	Indicates distance to obstacle.
RVRB TIME CEN[RL] [ms]	Indicates distance to obstacle.
RVRB TIME CEN[RR] [ms]	Indicates distance to obstacle.
RVRB TIME CEN[FL] [ms]	Indicates distance to obstacle.
RVRB TIME CEN[FR] [ms]	Indicates distance to obstacle.