LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2016 >> Q50 Base, RWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Driver Assistance System (Driver Assistance System) (Introduction) (Except Hybrid) >> System Description >> System >> Blind Spot Intervention (Without Direct Adaptive Steering System) >> System Description >> Operation Condition Of Blind Spot Intervention System
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Operation Condition Of Blind Spot Intervention System

NOTE:
  • When the Blind Spot Intervention system setting on the integral switch is ON.
  • The Blind Spot Intervention system may not function properly, depending on the situation. Refer to PRECAUTIONS FOR BLIND SPOT WARNING/BLIND SPOT INTERVENTION .
  • Blind Spot Intervention braking will not operate or will stop operating and only a warning chime will sound under the following conditions.
    • When the brake pedal is depressed.
    • When the accelerator pedal is depressed while brake control assist is provided.
    • When steering quickly.
    • When the ICC, DCA, PFCW or FEB warnings sound.
    • When the hazard warning flashers are operated.
    • When driving on a curve at a high speed.
  • Under the following conditions, the Blind Spot Intervention system will be turned off automatically, a beep will sound and the Blind Spot Intervention system display will change color to yellow. The BSW system is still available, but the Blind Spot Intervention system will not be available until the conditions no longer exist.
    • When the VDC system (except TCS function) or ABS operates.
    • When the VDC system is turned OFF.
    • When the drive mode select switch is turned to the SNOW mode.
scientia non olet · About LEMON Manuals