Diagnosis Procedure
- CHECK CONTINUITY CAMERA IMAGE SIGNAL CIRCUIT FOR OPEN
- Turn ignition switch OFF.
- Disconnect display control unit harness connector and around view monitor control unit harness connector.
- Check continuity between display control unit harness connector and around view monitor control unit harness connector.
Display control unit Around view monitor control unit Continuity Connector Terminal Connector Terminal M101 38 B51 47 Existed 58 48
Is the inspection result normal?
YES
GO TO STEP 2 .
NO
Repair or replace malfunctioning parts.
- CHECK CONTINUITY CAMERA IMAGE SIGNAL CIRCUIT FOR SHORT
Check continuity between display control unit harness connector and ground.
Display control unit Ground Continuity Connector Terminal M101 58 Not existed Is the inspection result normal?
YES
GO TO STEP 3 .
NO
Repair or replace malfunctioning parts.
- CHECK CAMERA IMAGE SIGNAL
- Connect display control unit harness connector and around view monitor control unit harness connector.
- Turn ignition switch ON.
- Check signal between display control unit harness connector and ground.
Terminals Condition Reference value (+) (-) Display control unit Connector Terminal M101 58 Ground At camera image is displayed.
Is the inspection result normal?
YES
Replace display control unit. Refer to REMOVAL AND INSTALLATION .
NO
Replace around view monitor control unit. Refer to REMOVAL AND INSTALLATION .