Consult Function: Configuration
Configuration has three functions as follows.
| Function | Description | |
|---|---|---|
| Read/Write Configuration | Before Replace ECU | Allows the reading of vehicle specification written in display control unit to store the specification in CONSULT. |
| After Replace ECU | Allows the writing of the vehicle information stored in CONSULT into the display control unit. | |
| Manual Configuration | Allows the writing of the vehicle specification into the display control unit by hand. | |
CAUTION:
- When replacing display control unit, you must perform "Read / Write Configuration" or "Manual Configuration" with CONSULT.
- Complete the procedure of "Read / Write Configuration" or "Manual Configuration" in order.
- If you set incorrect "Read / Write Configuration" or "Manual Configuration", incidents might occur.
- Configuration is different for each vehicle model. Confirm configuration of each vehicle model.