Vehicle Signals
A comparison check can be made of each actual vehicle signal and the signals recognized by the system.
DISPLAY CONTROL UNIT
| Diagnosis item | Display | Vehicle status | Remarks |
|---|---|---|---|
| Vehicle Speed | ON | Vehicle speed > 0 km/h (0 MPH) | Changes in indication may be delayed. This is normal. |
| OFF | Vehicle speed = 0 km/h (0 MPH) | ||
| Parking Brake Signal | ON | Parking brake is applied. | |
| OFF | Parking brake is released. | ||
| Light Signal | ON | Block the light beam from the auto light optical sensor when the light switch is ON. | - |
| OFF | Either of the following conditions
|
||
| Ignition Signal | ON | Ignition switch ON. | - |
| OFF | Ignition switch in ACC position. | ||
| Reverse Signal | ON | Shift the selector lever to "R" position. | Changes in indication may be delayed. This is normal. |
| OFF | Shift the selector lever other than "R" position. |
NAVI CONTROL UNIT
| Diagnosis item | Display | Vehicle status | Remarks |
|---|---|---|---|
| Vehicle Speed | ON | Vehicle speed > 0 km/h (0 MPH) | Changes in indication may be delayed. This is normal. |
| OFF | Vehicle speed = 0 km/h (0 MPH) | ||
| Ignition Signal | ON | Ignition switch ON. | - |
| OFF | Ignition switch in ACC position. | ||
| Reverse Signal | ON | Shift the selector lever to "R" position. | Changes in indication may be delayed. This is normal. |
| OFF | Shift the selector lever other than "R" position. |
NOTE:
Only models with navigation system.