LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2016 >> Q50 Base, RWD >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System (DTC/Circuit Diagnosis) (Except Hybrid) (5 Of 5) >> DTC/Circuit Diagnosis >> Refrigerant Pressure Sensor >> Component Function Check >> Diagnostic Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnostic Test

  1. CHECK REFRIGERANT PRESSURE SENSOR FUNCTION

    1. Start engine and warm it up to normal operating temperature.
    2. Turn A/C switch and blower fan switch ON.
    3. Check the voltage between ECM harness connector terminals as per the following.
      ECM Voltage (V)
      Connector + -
      Terminal Terminal
      E200 143
      (Refrigerant pressure sensor signal)
      120 1.0 - 4.0

    Is the inspection result normal?

    YES 

    INSPECTION END

    NO 

    Proceed to DIAGNOSIS PROCEDURE .