How To Set
With CONSULT
Perform the "CLEAN SW SET" of HVAC work support item.
| Work support items | Display | Setting |
|---|---|---|
| CLEAN SW SET | Mode 1 | Initial setting |
| Mode 2 | Setting 1 | |
| Mode 3 (Initial status) | Setting 2 | |
| Mode 4 | Setting 3 |
| Setting | Setting status |
|---|---|
| Initial setting | When the auto intake switch is ON, the A/C switch is also turned ON in synchronization with the auto intake switch. Control of the auto intake switch is functional even when the A/C switch is turned OFF. |
| Setting 1 | When the auto intake switch is ON, the A/C switch is not turned ON in synchronization with the auto intake switch. Control of the auto intake switch is functional even when the A/C switch is turned OFF. |
| Setting 2 | When the auto intake switch is ON, the A/C switch is also turned ON in synchronization with the auto intake switch. When the A/C switch is turned OFF, the auto intake switch is turned OFF in synchronization with the A/C switch. |
| Setting 3 | Auto intake switch can be turned ON only when A/C switch is ON. When the A/C switch is turned OFF, the auto intake switch is turned OFF in synchronization with the A/C switch. |
NOTE:
When the battery cable is disconnected from the negative terminal or when the battery voltage becomes 10 V or less, the setting of WORK SUPPORT may be cancelled.