DTC Confirmation Procedure
- DTC REPRODUCTION PROCEDURE
With CONSULT
- Turn the ignition switch OFF and wait for at least 10 seconds.
Start the engine.
CAUTION:Never drive the vehicle.
- Perform self-diagnosis for "EPS/DAST 3".
Is DTC "C13D9 - 00" detected?
YES
Proceed to diagnosis procedure. Refer to DIAGNOSIS PROCEDURE .
NO - 1
To check malfunction symptom before repair: Refer to INTERMITTENT INCIDENT .
NO - 2
Confirmation after repair: INSPECTION END
- Turn the ignition switch OFF and wait for at least 10 seconds.