LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2016 >> Q50 Base, RWD >> Repair and Diagnosis (Single Page) >> Steering >> Power Steering >> Steering Control System (Direct Adaptive Steering) (DTCS) (Except Hybrid) >> DTC/Circuit Diagnosis >> DTC C13AD-00: Control Module >> DAST 2 >> Component Inspection >> Diagnostic Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnostic Test

  1. CHECK THE MOTOR

    1. Turn the ignition switch OFF.
    2. Disconnect steering angle sub motor harness connector.
    3. Check the continuity between motor connector terminals.
      Steering angle sub motor Continuity
      Terminal
      1 2 Existed
      1 3 Existed
      1 4 Not existed
      2 3 Existed
      2 4 Not existed
      3 4 Not existed

    Is the inspection result normal?

    YES 

    INSPECTION END

    NO 

    Steering angle sub motor is malfunction. Replace steering gear assembly. Refer to REMOVAL AND INSTALLATION .