System Initialization: Description

WARNING: This page is about a different car, the 2019 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.

Initialize the system if any of the following work has been done. Refer to Work Procedure .

When control unit replaced.
Removal and installation of regulator assembly.
Disconnection and connection of power window main switch harness connector.
Removal and installation of motor from regulator assembly.
Operation of regulator assembly as an independent unit.
Removal and installation of door glass.
Removal and installation of door glass run.

CAUTION: The following specified operations cannot be performed under the non-initialized condition.

Auto-up operation
Anti-pinch function