Work Procedure

WARNING: This page is about a different car, the 2019 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

Use "Manual Configuration" only when "Parts number" of ADAS control unit 2 cannot be read.
If an error occurs during configuration, start over from the beginning.

CHECKING PARTS NUMBER
WITH CONSULT
1. Select "Before Replace ECU" of "Read/Write Configuration".
2. Check that "Parts number" is displayed on CONSULT.
Is "Parts number" displayed?

YES

GO TO 2.

NO

GO TO 6.
VERIFYING PARTS NUMBER (1)
WITH CONSULT

Compare a "Parts number" displayed on the CONSULT screen with the one searched by using FAST (service parts catalogue) to check that these "Parts number" agree with each other.

NOTE: For the "Parts number" searched by using FAST (service parts catalog), use the last five digits of the "Parts number".

GO TO 3.
SAVING PARTS NUMBER
WITH CONSULT

Save "Parts number" on CONSULT.

GO TO 4.
REPLACE ADAS CONTROL UNIT 2 (1)
Replace ADAS control unit 2. Refer to Removal and Installation .

GO TO 5.
WRITING (AUTOMATIC WRITING)
WITH CONSULT
1. Select "After Replace ECU" of "Re/programming, Configuration" or that of "Read / Write Configuration".
2. Select the "Parts number" agreeing with the one stored on CONSULT and the one searched by using FAST (service parts catalogue) to write the "Parts number" into the ADAS control unit 2.
GO TO 8.
REPLACE ADAS CONTROL UNIT 2 (2)
Replace ADAS control unit 2. Refer to Removal and Installation .

GO TO 7.
WRITING (MANUAL WRITING)
WITH CONSULT
1. Select "Manual Configuration".
2. Select the "Parts number" searched by using FAST (service parts catalogue) to write the "Parts number" into the ADAS control unit 2.
  NOTE: For the "Parts number" searched by using FAST (service parts catalog), use the last five digits of the "Parts number".
GO TO 8.
VERIFYING PARTS NUMBER (2)
WITH CONSULT

Compare a "Parts number" displayed on the CONSULT screen with the one searched by using FAST (service parts catalogue) to check that these "Parts number" agree with each other.

NOTE: For the "Parts number" searched by using FAST (service parts catalog), use the last five digits of the "Parts number".

GO TO 9.
OPERATION CHECK
Confirm that each function controlled by ADAS control unit 2 operates normally.

WORK END