LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2016 >> QX50 AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Infotainment >> Audio, Visual & Navigation System (BOSE Audio With Navigation) (Introduction And Wiring Diagrams) >> Ecu Diagnosis Information >> Around View Monitor Control Unit >> Reference Value >> Values On The Diagnosis Tool
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Values On The Diagnosis Tool

NOTE:

The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.

CONSULT MONITOR ITEM

Monitor Item Condition Value/Status
ST ANGLE SENSOR SIGNAL
[ON/OFF]
Ignition switch ON When steering angle sensor signal is input ON
Other than the above OFF
REVERSE SIGNAL
[ON/OFF]
Ignition switch ON R position ON
Other than R position OFF
VEHICLE SPEED SIGNAL
[ON/OFF]
Ignition switch ON When vehicle speed is input ON
Other than the above OFF
CAMERA SWITCH SIGNAL
[ON/OFF]
Ignition switch ON When camera switch signal is input ON
Other than the above OFF
CAMERA OFF SIGNAL
[ON/OFF]
Ignition switch ON When camera OFF signal is input ON
Other than the above OFF
ST ANGLE SENSOR TYPE
[Absolute]
Ignition switch ON - Absolute
STEERING GEAR RATIO TYPE
[TYPE1]
Ignition switch ON - TYPE1
STEERING POSITION
[LHD/RHD]
Ignition switch ON - LHD
REAR CAMERA IMAGE SIGNAL
[OK/NG]
Ignition switch ON When rear camera image signal input status is normal OK
When rear camera image signal input status is not normal NG
R-CAMERA COMM STATUS
[OK/NG]
Ignition switch ON When communication status with rear camera is normal OK
When communication status with rear camera is not normal NG
R-CAMERA COMM LINE
[OK/NG]
Ignition switch ON When communication line with rear camera is normal OK
When communication line with rear camera is not normal NG
F-CAMERA IMAGE SIGNAL
[OK/NG]
Ignition switch ON When front camera image signal input status is normal OK
When front camera image signal input status is not normal NG
F-CAMERA COMM STATUS
[OK/NG]
Ignition switch ON When communication status with front camera is normal OK
When communication status with front camera is not normal NG
F-CAMERA COMM LINE
[OK/NG]
Ignition switch ON When communication line with front camera is normal OK
When communication line with front camera is not normal NG
DR-SIDE CAMERA IMAGE SIG
[OK/NG]
Ignition switch ON When side camera LH image signal input status is normal OK
When side camera LH image signal input status is not normal NG
DR CAMERA COMM STATUS
[OK/NG]
Ignition switch ON When communication status with side camera LH is normal OK
When communication status with side camera LH is not normal NG
DR-SIDE CAMERA COMM LINE
[OK/NG]
Ignition switch ON When communication line with side camera LH is normal OK
When communication line with side camera LH is not normal NG
PA-SIDE CAMERA IMAGE SIG
[OK/NG]
Ignition switch ON When side camera RH image signal input status is normal OK
When side camera RH image signal input status is not normal NG
PA CAMERA COMM STATUS
[OK/NG]
Ignition switch ON When communication status with side camera RH is normal OK
When communication status with side camera RH is not normal NG
PA-SIDE CAMERA COMM LINE
[OK/NG]
Ignition switch ON When communication line with side camera RH is normal OK
When communication line with side camera RH is not normal NG
ACC Ignition switch ACC ON
Ignition switch OFF OFF
FOLDING MOTOR VOLT 1
[ON/OFF]
Ignition switch ON Driver side door mirror is in expanded status ON
Driver side door mirror is in retracted status OFF
FOLDING MOTOR VOLT 2
[ON/OFF]
Ignition switch ON Driver side door mirror is in expanded status OFF
Driver side door mirror is in retracted status ON