Diagnostic Test

CHECK MANUAL MODE SWITCH

Check continuity between A/T shift selector connector terminals.

A/T shift selector connector		Condition	Continuity
Terminal		Condition	Continuity
1	4	Selector lever is shifted to manual shift gate side	Existed
1		Other than the above	Not existed
2		Selector lever is shifted to - side	Existed
2		Other than the above	Not existed
3		Selector lever is shifted to + side	Existed
3		Other than the above	Not existed
5		Selector lever is shifted to manual shift gate side	Not existed
5		Other than the above	Existed

Is the inspection result normal?

YES

INSPECTION END

Repair or replace damaged parts. Refer to REMOVAL AND INSTALLATION .