LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2016 >> QX60 Base, FWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Cruise Control Systems >> Intelligent Cruise Control System (Introduction, Wiring Diagrams And Basic Inspection) (ICC) (Except Hybrid) >> System Description >> Operation >> Vehicle-To-Vehicle Distance Control Mode Function >> Switch Name And Function
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Switch Name And Function

G08852384Courtesy of NISSAN NORTH AMERICA, INC.
No. Switch name Description
1 CANCEL switch Deactivates the system without erasing the set speed
2 RESUME/ACCELERATE switch Resumes set speed or increases speed incrementally
  • Push and hold the switch to increase the set speed by 8 km/h (5 MPH)
  • Push then quickly release the switch to increase the set speed by 1.6 km/h (1 MPH)
3 SET/COAST switch Sets desired cruise speed or reduces speed incrementally
  • Push and hold the switch to decrease the set speed by 8 km/h (5 MPH)
  • Push then quickly release the switch to decrease the set speed by 1.6 km/h (1 MPH)
NOTE:

The minimum set speed is 32 km/h (20 MPH)

4 DISTANCE switch Changes the following distance from: Long, Middle, Short
5 MAIN switch Master switch to activate the system (Press for less than 1.5 seconds)