LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2016 >> QX60 Base, FWD >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Brake Control System (Introduction, Wiring Diagrams And Basic Inspection) (With ICC) (Except Hybrid) >> System Description >> Diagnosis System [Abs Actuator And Electric Unit (Control Unit)] >> Consult Function >> Active Test >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Active Test: Notes

The active test is used to determine and identify details of a malfunction, based on self-diagnosis test results and data obtained in the DATA MONITOR. In response to instructions from CONSULT, instead of those from ABS actuator and electric unit (control unit) on the vehicle, a drive signal is sent to the actuator to check its operation.

CAUTION:
  • Never perform ACTIVE TEST while driving the vehicle.
  • Always bleed air from brake system before active test.
  • Never perform active test when system is malfunctioning.
NOTE:
  • When active test is performed while depressing the pedal, the pedal depressing stroke may change. This is not a malfunction.
  • "TEST IS STOPPED" is displayed approx. 10 seconds after operation start.
  • When performing active test again after "TEST IS STOPPED" is displayed, select "BACK".
  • ABS warning lamp, brake warning lamp and VDC warning lamp may turn ON during active test. This is not a malfunction.
scientia non olet · About LEMON Manuals