Operation Condition

Once the following condition from below is established, alert or warning is performed.

Warning/Information functions		Operation procedure
Intelligent Key system malfunction		When a malfunction is detected on BCM, "KEY" warning lamp illuminates.
OFF position warning	For internal	When condition A, B or condition C is satisfied Condition A Ignition switch: ACC position Door switch (driver side): ON (Door is open) Condition B Turn ignition switch from ON to OFF while door is open Condition C Intelligent Key is inserted in key slot Door switch (driver side): ON (Door is open)
OFF position warning	For external	OFF position warning (For internal) is in active mode, driver side door has is closed. NOTE: OFF position (For external) active only when each of the sequence occurs as per the following: P position warning → ACC warning → OFF position warning (For internal) → OFF position warning (For internal)
P position warning		Shift position: Not the P position. Engine is running to stopped (Ignition switch is ON to OFF).
ACC warning		When the P position warning is in active mode, shift position is changed to P position. Ignition switch: ACC position.
Take away warning	Door is open to close	Ignition switch: Not the LOCK position. Door switch: ON to OFF (Door is open to close). Intelligent Key can not be detected inside the vehicle.
	Door is open	Ignition switch: Not the LOCK position. Door switch: ON (Door is open). Key ID verification every 5 seconds when registered Intelligent Key can not be detected inside the vehicle.
	Push button-ignition switch operation	Ignition switch: Not the LOCK position. Press push-button ignition switch. Intelligent Key can not be detected inside the vehicle.
	Intelligent Key is removed from key slot	When Intelligent Key is removed from key slot, Intelligent Key can not be detected inside the vehicle.
Door lock operation warning	Request switch operation	When request switch is pushed (lock operation) under the following conditions. All doors are closed. All door is unlocked. Intelligent Key is inside vehicle.
Door lock operation warning	Intelligent Key button operation	When Intelligent Key button is pushed (lock operation) under the following conditions. Door switch: ON (Any door is open). For 3 seconds after Intelligent Key is removed from key slot.
Key warning		Ignition switch is in the OFF position. Driver side door switch: ON (Driver side door is open). Intelligent Key is inserted in key slot.
Intelligent Key insert information		Door switch: ON to OFF (Door is open to close). Ignition switch: OFF to ON position. Intelligent Key is out of key slot. Intelligent Key can not be detected inside the vehicle.
Engine start information	Ignition switch is in the ON position	Ignition switch: ON position. Shift position: P position. Engine is stopped.
Engine start information	Ignition switch is not in the ON position	Ignition switch: Not in the ON position. Shift position: P position. Intelligent Key is inserted in key slot or Intelligent Key can be detected inside the vehicle.
Intelligent Key low battery warning		When Intelligent Key is low battery is low, BCM is detected after ignition switch is turned ON.
Key ID warning		When registered intelligent Key can not be detected inside the vehicle after ignition switch is turned ON.