Values On The Diagnosis Tool
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.
| Monitor item | Condition | Value/Status | |
|---|---|---|---|
| MAIN SW | Ignition switch ON | When MAIN switch is pressed | On |
| When MAIN switch is not pressed | Off | ||
| SET/COAST SW | Ignition switch ON | When SET/COAST switch is pressed | On |
| When SET/COAST switch is not pressed | Off | ||
| CANCEL SW | Ignition switch ON | When CANCEL switch is pressed | On |
| When CANCEL switch is not pressed | Off | ||
| RESUME/ACC SW | Ignition switch ON | When RESUME/ACCELERATE switch is pressed | On |
| When RESUME/ACCELERATE switch is not pressed | Off | ||
| DISTANCE SW | Ignition switch ON | When DISTANCE switch is pressed | On |
| When DISTANCE switch is not pressed | Off | ||
| CRUISE OPE | Drive the vehicle and activate the vehicle-to-vehicle distance control mode | When ICC system is controlling | On |
| When ICC system is not controlling | Off | ||
| ON ROOT GUIDANCE |
NOTE:
The item is displayed, but not used |
Off | |
| BRAKE SW | Ignition switch ON | When brake is depressed | Off |
| When brake is not depressed | On | ||
| STOP LAMP SW | Ignition switch ON | When brake pedal is depressed | On |
| When brake pedal is not depressed | Off | ||
| CLUTCH SW SIG |
NOTE:
The item is displayed, but not used |
Off | |
| IDLE SW | Engine running | Idling | On |
| Except idling (depress accelerator pedal) | Off | ||
| SET DISTANCE |
|
When set to "long" | Long |
| When set to "middle" | Mid | ||
| When set to "short" | Short | ||
| CRUISE LAMP | Start the engine and press MAIN switch | ICC system ON (MAIN switch indicator ON) |
On |
| ICC system OFF (MAIN switch indicator OFF) |
Off | ||
| OWN VHCL | Start the engine and press MAIN switch | ICC system ON (Own vehicle indicator ON) |
Off |
| ICC system OFF (Own vehicle indicator OFF) |
Off | ||
| VHCL AHEAD | Drive the vehicle and activate the vehicle-to-vehicle distance control mode | When a vehicle ahead is detected (vehicle ahead detection indicator ON) | On |
| When a vehicle ahead is not detected (vehicle ahead detection indicator OFF) | Off | ||
| ICC WARNING | Start the engine and press MAIN switch | When ICC system is malfunctioning | On |
| When ICC system is normal | Off | ||
| VHCL SPEED SE | While driving | Displays the vehicle speed calculated by ADAS control unit | |
| SET VHCL SPD | While driving | When vehicle speed is set | Displays the set vehicle speed |
| BUZZER O/P | Engine running | When the buzzer of the following system operates
|
On |
When the buzzer of the following system not operates
|
Off | ||
| THRTL SENSOR |
NOTE:
The item is displayed, but not used |
0.0 | |
| ENGINE RPM | Engine running | Equivalent to tachometer reading | |
| WIPER SW | Ignition switch ON | Wiper not operating | Off |
| Wiper LO operation | Low | ||
| Wiper HI operation | High | ||
| NAVI-ICC DISP |
NOTE:
The item is displayed, but not used |
Off | |
| YAW RATE |
NOTE:
The item is displayed, but not used |
0.0 | |
| BA WARNING | Engine running | FEB warning lamp ON
|
On |
FEB warning lamp OFF
|
Off | ||
| STP LMP DRIVE | Drive the vehicle and activate the vehicle-to-vehicle distance control mode | When ICC brake hold relay is activated | On |
| When ICC brake hold relay is not activated | Off | ||
| D RANGE SW | Engine running | When the selector lever is in "D" position or manual mode | On |
| When the selector lever is in any position other than "D" or manual mode | Off | ||
| NP RANGE SW | Engine running | When the selector lever is in "N", "P" position | On |
| When the selector lever is in any position other than "N", "P" | Off | ||
| PKB SW | Ignition switch ON | When the parking brake is applied | On |
| When the parking brake is released | Off | ||
| PWR SUP MONI | Engine running | Power supply voltage value of ADAS control unit | |
| VHCL SPD AT | While driving | Value of A/T vehicle speed sensor signal | |
| THRTL OPENING | Engine running | Depress accelerator pedal | Displays the throttle position |
| GEAR | While driving | Displays the gear position | |
| NP SW SIG |
NOTE:
The item is displayed, but not used |
Off | |
| MODE SIG | Start the engine and press MAIN switch | When ICC system is deactivated | Off |
| When vehicle-to-vehicle distance control mode is activated | ICC | ||
| When conventional (fixed speed) cruise control mode is activated | ASCD | ||
| SET DISP IND |
|
SET switch indicator ON | On |
| SET switch indicator OFF | Off | ||
| DISTANCE | Drive the vehicle and activate the vehicle-to-vehicle distance control mode | When a vehicle ahead is detected | Displays the distance from the preceding vehicle |
| When a vehicle ahead is not detected | 0.0 | ||
| RELATIVE SPD | Drive the vehicle and activate the vehicle-to-vehicle distance control mode | When a vehicle ahead is detected | Displays the relative speed. |
| When a vehicle ahead is not detected | 0.0 | ||
| DYNA ASIST SW | Ignition switch ON | When dynamic driver assistance switch is pressed | On |
| When dynamic driver assistance switch is not pressed | Off | ||
| DCA ON IND | Start the engine and press dynamic driver assistance switch (When DCA setting is ON) |
DCA system OFF | Off |
| DCA system ON | On | ||
| DCA VHL AHED | Drive the vehicle and activate the DCA system | When a vehicle ahead is not detected (vehicle ahead detection indicator OFF) | Off |
| When a vehicle ahead is detected (vehicle ahead detection indicator ON) | On | ||
| IBA SW |
NOTE:
The item is displayed, but not used |
Off | |
| FCW SYSTEM ON | Ignition switch ON | When the PFCW system is ON | On |
| When the PFCW system is OFF | Off | ||
| APA TEMP | Engine running | Display the accelerator pedal actuator integrated motor temperature | |
| APA PWR | Ignition switch ON | Power supply voltage value of accelerator pedal actuator | |
| LDW SYSTEM ON | Ignition switch ON | When the LDW system is ON | On |
| When the LDW system is OFF | Off | ||
| LDW ON LAMP | Ignition switch ON | When the LDW system is ON | On |
| When the LDW system is OFF | Off | ||
| LDP ON IND | Start the engine and press dynamic driver assistance switch (When LDP system setting is ON) |
When the LDW system is ON | On |
| When the LDW system is OFF | Off | ||
| LANE DPRT W/L | Drive the vehicle and activate the LDW system or LDP system | Lane departure warning ON | On |
| Lane departure warning OFF | Off | ||
| LDW BUZER OUTPUT | Drive the vehicle and activate the LDW/LDP system or Blind Spot Warning/Blind Spot Intervention system | When the buzzer of the following system operates
|
On |
When the buzzer of the following system does not operate
|
Off | ||
| LDP SYSTEM ON | Start the engine and press dynamic driver assistance switch (When LDP system setting is ON) |
When the LDP system is ON | On |
| When the LDP system is OFF | Off | ||
| WARN REQ | Drive the vehicle and activate the LDP system | Lane departure warning is operating | On |
| Lane departure warning is not operating | Off | ||
| READY signal | Start the engine and press dynamic driver assistance switch (When LDP system setting is ON) |
When the LDP system is ON | On |
| When the LDP system is OFF | Off | ||
| Camera lost | Drive the vehicle and activate the LDW system, LDP system or Blind Spot Intervention system | Both side lane markers are detected | Detect |
| Deviate side lane marker is lost | Deviate | ||
| Both side lane markers are lost | Both | ||
| Shift position |
|
Displays the shift position | |
| Turn signal | Turn signal lamps OFF | Off | |
| Turn signal lamp LH blinking | LH | ||
| Turn signal lamp RH blinking | RH | ||
| Turn signal lamp LH and RH blinking | LH&RH | ||
| SIDE G | While driving | Vehicle turning right | Negative value |
| Vehicle turning left | Positive value | ||
| STATUS signal | Drive the vehicle and activate the LDP system | When the LDP system is ON | Stnby |
| When the LDP system is operating | Warn | ||
| When the LDP system is canceled | Cancl | ||
| When the LDP system is OFF | Off | ||
| Lane unclear | While driving | Lane marker is unclear | On |
| Lane marker is clear | Off | ||
| FUNC ITEM | Ignition switch ON | FUNC 3 | |
| FUNC ITEM (NV-ICC) |
NOTE:
The item is displayed, but not used |
Off | |
| FUNC ITEM (NV-DCA) |
NOTE:
The item is displayed, but not used |
Off | |
| DCA SELECT | Ignition switch ON | "Distance Control Assist" set with the navigation screen is ON | On |
| "Distance Control Assist" set with the navigation screen is OFF | Off | ||
| LDP SELECT | Ignition switch ON | "Lane Departure Prevention" set with the navigation screen is ON | On |
| "Lane Departure Prevention" set with the navigation screen is OFF | Off | ||
| BSI SELECT | Ignition switch ON | "Blind Spot Intervention" set with the navigation screen is ON | On |
| "Blind Spot Intervention" set with the navigation screen is OFF | Off | ||
| BSW SELECT | Ignition switch ON | "Blind Spot Warning" set with the navigation screen is ON | On |
| "Blind Spot Warning" set with the navigation screen is OFF | Off | ||
| NAVI ICC SELECT |
NOTE:
The item is displayed, but not used |
Off | |
| NAVI DCA SELECT |
NOTE:
The item is displayed, but not used |
Off | |
| SYS SELECTABILITY | Ignition switch ON | Items set with the navigation screen can be switched normally | On |
| Items set with the navigation screen cannot be switched normally | Off | ||
| 4WD SW | Engine running | 4WD shift switch position is in AUTO | AUTO |
| 4WD shift switch position is in 4H | 4H | ||
| 4WD shift switch position is in 4L | 4L | ||
| WARN SYS SW | Ignition switch ON | When warning systems switch is pressed | On |
| When warning systems switch is not pressed | Off | ||
| BSW/BSI WARN LMP | Ignition switch ON | When the BSW system is malfunctioning | On |
| When the BSW system is normal | Off | ||
| BSI ON IND | Ignition switch ON | Blind Spot Intervention warning ON | On |
| Blind Spot Intervention warning OFF | Off | ||
| BSW SYSTEM ON | Ignition switch ON | When the BSW system is ON | On |
| When the BSW system is OFF | Off | ||
| BSI SYSTEM ON | Start the engine and press dynamic driver assistance switch (When Blind Spot Intervention system setting is ON) |
When the Blind Spot Intervention system is ON | On |
| When the Blind Spot Intervention system is OFF | Off | ||
| BCI SYSTEM ON | Engine running | When the BCI system is ON | On |
| When the BCI system is OFF | Off | ||
| BCI SWITCH | Ignition switch ON | When BCI switch is pressed | On |
| When BCI switch is not pressed | Off | ||
| BCI ON IND | Ignition switch ON | When BCI ON indicator is ON | On |
| When BCI ON indicator is OFF | Off | ||
| BCI OFF IND | Ignition switch ON | When BCI OFF indicator is ON | On |
| When BCI OFF indicator is OFF | Off | ||
| BCI WARNING IND | Ignition switch ON | When BCI malfunction indicator is ON | On |
| When BCI malfunction indicator is OFF | Off | ||
| BCI HI TEMP WARN IND | Ignition switch ON | When BCI not available indicator is ON | On |
| When BCI not available indicator is OFF | Off | ||