Data Monitor
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.
| Monitored item [Unit] |
ALL SIG (ICC) |
MAIN SIG (ICC) |
MAIN SIG (LDW/LDP) |
MAIN SIG (BSW/BSI) |
MAIN SIG (BCI) |
Description |
|---|---|---|---|---|---|---|
| MAIN SW [On/Off] |
* | * | * | * | Indicates [On/Off] status as judged from ICC steering switch (ECM transmits ICC steering switch signal through CAN communication) | |
| SET/COAST SW [On/Off] |
* | * | Indicates [On/Off] status as judged from ICC steering switch (ECM transmits ICC steering switch signal through CAN communication) | |||
| CANCEL SW [On/Off] |
* | * | Indicates [On/Off] status as judged from ICC steering switch (ECM transmits ICC steering switch signal through CAN communication) | |||
| RESUME/ACC SW [On/Off] |
* | * | Indicates [On/Off] status as judged from ICC steering switch (ECM transmits ICC steering switch signal through CAN communication) | |||
| DISTANCE SW [On/Off] |
* | Indicates [On/Off] status as judged from ICC steering switch (ECM transmits ICC steering switch signal through CAN communication) | ||||
| CRUISE OPE [On/Off] |
* | * | Indicates whether controlling or not (ON means "controlling") | |||
| ON ROOT GUIDANCE [On/Off] |
* |
NOTE:
The item is displayed, but not used |
||||
| BRAKE SW [On/Off] |
* | * | * | * | * | Indicates [On/Off] status as judged from ICC brake switch signal (ECM transmits ICC brake switch signal through CAN communication) |
| STOP LAMP SW [On/Off] |
* | * | * | * | * | Indicates [On/Off] status as judged from stop lamp switch signal (ECM transmits stop lamp switch signal through CAN communication) |
| CLUTCH SW SIG [On/Off] |
* | * | * | * |
NOTE:
The item is displayed, but not used |
|
| IDLE SW [On/Off] |
* | * | Indicates [On/Off] status of idle switch read from ADAS control unit through CAN communication (ECM transmits On/Off status through CAN communication) | |||
| SET DISTANCE [Short/Mid/Long] |
* | * | Indicates set distance memorized in ADAS control unit | |||
| CRUISE LAMP [On/Off] |
* | * | Indicates [On/Off] status of MAIN switch indicator output | |||
| OWN VHCL [On/Off] |
* | Indicates [On/Off] status of own vehicle indicator output | ||||
| VHCL AHEAD [On/Off] |
* | Indicates [On/Off] status of vehicle ahead detection indicator output | ||||
| ICC WARNING [On/Off] |
* | Indicates [On/Off] status of ICC system warning lamp output | ||||
| VHCL SPEED SE [km/h] or [mph] |
* | * | * | * | * | Indicates vehicle speed calculated from ADAS control unit through CAN communication [ABS actuator and electric unit (control unit) transmits vehicle speed signal (wheel speed) through CAN communication] |
| SET VHCL SPD [km/h] or [mph] |
* | * | Indicates set vehicle speed memorized in ADAS control unit | |||
| BUZZER O/P [On/Off] |
* | * | Indicates [On/Off] status of ICC warning chime output | |||
| THRTL SENSOR [deg] |
* | * |
NOTE:
The item is displayed, but not used |
|||
| ENGINE RPM [RPM] |
* | Indicates engine speed read from ADAS control unit through CAN communication (ECM transmits engine speed signal through CAN communication) | ||||
| WIPER SW [OFF/LOW/HIGH] |
* | Indicates wiper [OFF/LOW/HIGH] status (BCM transmits front wiper request signal through CAN communication) | ||||
| NAVI-ICC DISP [On/Off] |
* |
NOTE:
The item is displayed, but not used |
||||
| YAW RATE [deg/s] |
* |
NOTE:
The item is displayed, but not used |
||||
| BA WARNING [On/Off] |
* | Indicates [On/Off] status of FEB warning lamp output | ||||
| STP LMP DRIVE [On/Off] |
* | * | * | Indicates [On/Off] status of ICC brake hold relay drive output | ||
| D RANGE SW [On/Off] |
* | Indicates [On/Off] status of "D" or "M" positions read from ADAS control unit through CAN communication; ON when position "D" or "M" (TCM transmits shift position signal through CAN communication). | ||||
| NP RANGE SW [On/Off] |
* | Indicates shift position signal read from ADAS control unit through CAN communication (TCM transmits shift position signal through CAN communication) | ||||
| PKB SW [On/Off] |
* | Parking brake switch status [On/Off] judged from the parking brake switch signal that ADAS control unit readout via CAN communication is displayed (combination meter transmits the parking brake switch signal via CAN communication) | ||||
| PWR SUP MONI [V] |
* | * | Indicates IGN voltage input by ADAS control unit | |||
| VHCL SPD AT [km/h] or [mph] |
* | Indicates vehicle speed calculated from A/T vehicle speed sensor read from ADAS control unit through CAN communication (TCM transmits A/T vehicle speed sensor signal through CAN communication) | ||||
| THRTL OPENING [%] |
* | * | * | Indicates throttle position read from ADAS control unit through CAN communication (ECM transmits accelerator pedal position signal through CAN communication). | ||
| GEAR [1, 2, 3, 4, 5, 6, 7] |
* | Indicates A/T gear position read from ADAS control unit through CAN communication (TCM transmits current gear position signal through CAN communication) | ||||
| NP SW SIG [On/Off] |
* |
NOTE:
The item is displayed, but not used |
||||
| MODE SIG [OFF, ICC, ASCD] |
* | Indicates the active mode from ICC or ASCD [conventional (fixed speed) cruise control mode] | ||||
| SET DISP IND [On/Off] |
* | Indicates [On/Off] status of SET switch indicator output | ||||
| DISTANCE [m] |
* | Indicates the distance from the vehicle ahead | ||||
| RELATIVE SPD [m/s] |
* | Indicates the relative speed of the vehicle ahead | ||||
| DYNA ASIST SW [On/Off] |
* | * | * | Indicates [On/Off] status as judged from ICC steering switch signal | ||
| DCA ON IND [On/Off] |
* | The status [ON/OFF] of DCA system switch indicator output is displayed | ||||
| DCA VHL AHED [On/Off] |
* | The status [ON/OFF] of vehicle ahead detection indicator output in DCA system is displayed | ||||
| IBA SW [On/Off] |
* | * |
NOTE:
The item is displayed, but not used |
|||
| FCW SYSTEM ON [On/Off] |
* | * | Indicates [On/Off] status of PFCW system | |||
| APA TEMP [°C] |
* | * | Accelerator pedal actuator integrated motor temperature that the ADAS control unit readout via ITS communication is displayed (Accelerator pedal actuator transmits the integrated motor temperature via ITS communication) | |||
| APA PWR [V] |
* | * | Accelerator pedal actuator power supply voltage that the ADAS control unit readout via ITS communication is displayed (Accelerator pedal actuator transmits the power supply voltage via ITS communication) | |||
| LDW SYSTEM ON [On/Off] |
* | Indicates [On/Off] status of LDW system | ||||
| LDW ON LAMP [On/Off] |
* | Indicates [On/Off] status of LDW system ON display output | ||||
| LDP ON IND [On/Off] |
* | Indicates [On/Off] status of LDP system display output | ||||
| LANE DPRT W/L [On/Off] |
* | Indicates [On/Off] status of LDW/LDP warning display (Yellow) output | ||||
| LDW BUZER OUTPUT [On/Off] |
* | Indicates [On/Off] status of warning buzzer output | ||||
| LDP SYSTEM ON [On/Off] |
* | Indicates [On/Off] status of LDP system | ||||
| WARN REQ [On/Off] |
* | Indicates an ADAS control unit judged warning state (ON/OFF) of LDP system | ||||
| READY signal [On/Off] |
* | Indicates LDP system settings | ||||
| Camera lost [Detect/Deviate/Both] |
* | * | Indicates a lane marker detection state judged from a lane marker detection signal read by the ADAS control unit via ITS communication (Lane camera unit transmits a lane marker signal via ITS communication) |
|||
| Shift position [Off, P, R, N, D, M/T1 - 7] |
* | * | * | Indicates shift position read from ADAS control unit through CAN communication (TCM transmits shift position signal through CAN communication) | ||
| Turn signal [OFF/LH/RH/LH&RH] |
* | * | Indicates turn signal operation status read from ADAS control unit through CAN communication (BCM transmits turn indicator signal through CAN communication) | |||
| SIDE G [G] |
* | * | Indicates lateral G acting on the vehicle. This lateral G is judged from a side G sensor signal read by ADAS control unit via CAN communication (The ABS actuator and electric unit (control unit) transmits a side G sensor signal via CAN communication) |
|||
| STATUS signal [Stnby/Warn/Cancl/Off] |
* | Indicates a control state of LDP system | ||||
| Lane unclear [On/Off] |
* | * | Indicates an ON/OFF state of the lane marker. The ON/OFF state is judged from a detected lane condition signal read by the ADAS control unit via ITS communication (The lane camera unit transmits a detected lane condition signal via ITS communication) |
|||
| FUNC ITEM [FUNC 3] |
* | * | * | * | Indicates systems which can be set to ON/OFF by selecting "Driver Assistance"→"Dynamic Assistance Setting" of the navigation screen FUNC3: Distance Control Assist (DCA), Lane Departure Prevention (LDP), Blind spot Intervention |
|
| FUNC ITEM (NV-ICC) [Off] |
* | * | * | * |
NOTE:
The item is displayed, but not used |
|
| FUNC ITEM (NV-DCA) [Off] |
* | * | * | * |
NOTE:
The item is displayed, but not used |
|
| DCA SELECT [On/Off] |
* | * | * | * | Indicates an ON/OFF state of the DCA system. The DCA system can be set to ON/OFF by selecting "Driver Assistance"→"Dynamic Assistance Setting" of the navigation screen | |
| LDP SELECT [On/Off] |
* | * | * | * | Indicates an ON/OFF state of LDP system. LDP system can be set to ON/OFF by selecting "Driver Assistance"→"Dynamic Assistance Setting" of the navigation screen | |
| BSI SELECT [On/Off] |
* | * | * | * | Indicates an ON/OFF state of Blind Spot Intervention system. Blind Spot Intervention system can be set to ON/OFF by selecting "Driver Assistance"→"Dynamic Assistance Setting" of the navigation screen | |
| BSW SELECT [On/Off] |
* | * | * | * | Indicates an ON/OFF state of the BSW system. The BSW system can be set to ON/OFF by selecting "Driver Assistance"→"Dynamic Assistance Setting" of the navigation screen | |
| NAVI ICC SELECT [Off] |
* | * | * | * |
NOTE:
The item is displayed, but not used |
|
| NAVI DCA SELECT [Off] |
* | * | * | * |
NOTE:
The item is displayed, but not used |
|
| SYS SELECTABILITY [On/Off] |
* | * | * | * | Indicates the availability of ON/OFF switching for "Driver Assistance" items received from the AV control unit via CAN communication | |
| 4WD SW [AUTO/4H/4L] |
* | * | * | * | Indicates [On/Off] status as judged from current 4WD mode signal (Transfer control unit transmits current 4WD mode signal through CAN communication) |
|
| WARN SYS SW [On/Off] |
* | * | * | * | Indicates [On/Off] status of warning systems switch | |
| BSW/BSI WARN LMP [On/Off] |
* | Indicates [On/Off] status of Blind Spot Warning malfunction | ||||
| BSI ON IND [On/Off] |
* | Indicates [On/Off] status of Blind Spot Intervention system display | ||||
| BSW SYSTEM ON [On/Off] |
* | Indicates [On/Off] status of BSW system | ||||
| BSI SYSTEM ON [On/Off] |
* | Indicates [On/Off] status of Blind Spot Intervention system | ||||
| BCI SYSTEM ON [On/Off] |
* | Indicates [On/Off] status of BCI system | ||||
| BCI SWITCH [On/Off] |
* | Indicates [On/Off] status of BCI switch | ||||
| BCI ON IND [On/Off] |
* | Indicates [On/Off] status of BCI ON indicator | ||||
| BCI OFF IND [On/Off] |
* | Indicates [On/Off] status of BCI OFF indicator | ||||
| BCI WARNING IND [On/Off] |
* | Indicates [On/Off] status of BCI malfunction indicator | ||||
| BCI HI TEMP WARN IND [On/Off] |
* | Indicates [On/Off] status of BCI not available indicator |