DTC Detection Logic

NOTE:

If DTC P0014 or P0024 is displayed with DTC P0078, P0084 first perform trouble diagnosis for DTC P0078, P0084. Refer to DTC P0078, P0084: EVT CONTROL SOLENOID VALVE .

If DTC P0014 or P0024 is displayed with DTC P1078, P1084 first perform trouble diagnosis for DTC P1078, P1084. Refer to DTC P1078, P1084: EVT CONTROL POSITION SENSOR .

DTC No.	Trouble diagnosis name (Trouble diagnosis content)	Detecting condition	Possible cause
P0014	EXH/V TIM CONT-B1 [Exhaust valve timing control performance (bank 1)]	There is a gap between angle of target and phase-control angle degree.	Crankshaft position sensor Camshaft position sensor Exhaust valve timing control position sensor Exhaust valve timing control solenoid valve Accumulation of debris to the signal pick-up portion of the camshaft Timing chain installation Foreign matter caught in the oil groove for exhaust valve timing control
P0024	EXH/V TIM CONT-B2 [Exhaust valve timing control performance (bank 2)]