 |
Sub battery relay |
SUB BATTERY RELAY |
 |
Fuel pump |
FUEL PUMP |
 |
IPDM E/R |
IPDM E/R controls the internal relays.
When CAN communication with ECM is impossible, IPDM E/R performs fail-safe control.
|
 |
Main battery current sensor (With main battery temperature sensor) |
MAIN BATTERY CURRENT SENSOR (WITH MAIN BATTERY TEMPERATURE SENSOR) |
 |
Cooling fan control module |
COOLING FAN CONTROL MODULE |
 |
Charge air cooler |
SYSTEM DESCRIPTION |
 |
Refrigerant pressure sensor |
REFRIGERANT PRESSURE SENSOR |
 |
Combination meter |
COMPONENT LOCATION |
 |
Fuel tank pressure sensor |
Senses fuel tank pressure. |
 |
EVAP canister |
EVAP canister stores the generated fuel vapors in the sealed fuel tank to activated charcoals of EVAP canister when the engine is not operating or when refueling to the fuel tank. |
 |
EVAP canister vent control valve |
The ability to seal the vent is necessary for the on board diagnosis of other evaporative emission control system components. This solenoid valve is used only for diagnosis, and usually remains opened. |
 |
Resistor 2 |
SYSTEM DESCRIPTION |
 |
Resistor 1 |
SYSTEM DESCRIPTION |
 |
EMCM (Energy Management Control Module) |
EMCM (ENERGY MANAGEMENT CONTROL MODULE) |
 |
Fuel pressure sensor |
FUEL PRESSURE SENSOR |
 |
Engine restart bypass control relay |
ENGINE RESTART BYPASS CONTROL RELAY |
 |
EMCM relay |
SYSTEM DESCRIPTION |
 |
Ignition relay |
SYSTEM DESCRIPTION |
 |
Sub battery current sensor (With sub battery temperature sensor) |
SUB BATTERY CURRENT SENSOR (WITH SUB BATTERY TEMPERATURE SENSOR) |
 |
FPCM (Fuel Pump Control Module) |
FPCM (FUEL PUMP CONTROL MODULE) |