LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2017 >> Q50 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 391 (Steering Control System - Direct Adaptive Steering) >> Removal And Installation >> Steering Force Control Module >> Removal and Installation >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal and Installation: Removal

WARNING: This page is about a different car, the 2019 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the glove box. Refer to Removal and Installation .
  2. Remove the instrument lower panel. Refer to Removal and Installation .
  3. Disconnect steering force control module harness connectors.
  4. Disconnect ECM harness connectors.
  5. Remove the nuts SYMBOL of steering force control module SYMBOL mounting bracket.
    GNSJSGIA1341Z-341Courtesy of NISSAN NORTH AMERICA, INC.
  6. Remove the steering force control module.
    CAUTION: When replacing control module, replace the following control modules as a set.
    • Steering force control module
    • Steering angle main control module
    • Steering angle sub control module
scientia non olet · About LEMON Manuals