Fail-Safe Control By DTC
WARNING: This page is about a different car, the 2019 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
BCM performs fail-safe control when any DTC are detected.
|
Display contents of CONSULT |
Fail-safe |
|
B2192: ID DISCORD BCM-ECM |
Inhibit engine cranking |
|
B2193: CHAIN OF BCM-ECM |
Inhibit engine cranking |
|
B2195: ANTI-SCANNING |
Inhibit engine cranking |
|
B2198: NATS ANTENNA AMP |
Inhibit engine cranking |
|
B219B: ID DISCORD SVT-BCM |
Inhibit engine cranking |
|
B2608: STARTER RELAY |
Inhibit engine cranking |
|
B260F: ENG STATE SIG LOST |
Inhibit engine cranking |
|
B261B: RES ENG RUN STUCK MALFNC |
Fuel cut |
|
B26F1: IGN RELAY OFF |
Inhibit engine cranking |
|
B26F2: IGN RELAY ON |
Inhibit engine cranking |
|
B26F3: START CONT RLY ON |
Inhibit engine cranking |
|
B26F4: START CONT RLY OFF |
Inhibit engine cranking |
|
B26F7: BCM |
Inhibit engine cranking by Intelligent Key system |
|
B26FE: HOOD SW CAN DIAG ERROR |
Inhibit remote engine start |