Value On The Diagnosis Tool

WARNING: This page is about a different car, the 2019 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.

Monitor item	Condition		Value/Status
CAMERA HIGH TEMP	When the temperature around lane camera unit is adequate		NORMAL
	When the temperate around the lane camera unit is high		HIGH
WIPER	Ignition switch ON	Wiper position is High	Hi
		Wiper position is Low	Lo
		Wiper position is OFF	Off
TURN SIGNAL	Turn signal lamp LH and RH blinking		LH&RH
	Turn signal lamp LH blinking		LH
	Turn signal lamp RH blinking		RH
	Turn signal lamps OFF		Off
VEHICLE SPEED	While drive		km/h
DRIVER ASSIST SYSTEM SET	NOTE: The item is displayed, but it is not monitored		NO REQ
BRAKE OPERATION STATUS	When brake pedal is depressed		Off
	When brake pedal is depressed		On
	When brake pedal is securely depressed		CNFRM
	When brake pedal operation is not judged		UNKWN
AIMING DONE	Camera aiming is completed		finished
	Camera aiming is not adjusted		not finished
AIMING RESULT	Camera aiming is completed		OK
	Camera aiming is not completed		NOK
STEERING ANGLE	When driving straight		Approx. 0.0 deg
	When steering wheel is steered		Value of steering angle (deg)
YAW RATE	Vehicle stopped		Approx. 0 deg/s
	Turning right		Negative value
	Turning left		Positive value
FCTRY AIM YAW	Camera aiming is completed		0 +/- 3.0 deg
FCTRY AIM ROL	Camera aiming is completed		0 +/- 3.0 deg
FCTRY AIM PIT	Camera aiming is completed		0 +/- 3.0 deg
Camera yaw	When automatic adjustment is performed		Correction value (deg)
LDW FUNCTION	When LDW function is ON		NORMAL
	When LDW function malfunction is detected		MALF
LDW SETTING DISPLAY	NOTE: The item is displayed, but it is not monitored		NTHNG
DRIVER ASSIST SYSTEM BZZR	NOTE: The item is displayed, but it is not monitored		NTHNG
Runtime aiming	When automatic adjustment is not performed		not finished
	When automatic adjustment is performed		finished
Camera pitch	When automatic adjustment is performed		Correction value (deg)
LDW LEFT	Left side lane maker is not detected		Off
	Left side lane maker is detected		On
LDW RIGHT	Right side lane maker is not detected		Off
	Right side lane maker is detected		On
LDW STATUS DISPLAY	NOTE: The item is displayed, but it is not monitored		Off
AHL status	HBA system is in fail-safe.		AHL failure
	HBA system is normal.		Normal
	HBA system is unavailable.		Unavailable
HBA FUNCTION	NOTE: The item is displayed, but it is not monitored		--
LOW BEAM STATUS	NOTE: The item is displayed, but it is not monitored		Off
HIGH BEAM STATUS	NOTE: The item is displayed, but it is not monitored		Off
DISTANCE	Drive the vehicle and FEB system ON	When the lane camera detects an object to be controlled	Displays distance from vehicle ahead
		When the lane camera does not detect an object to be controlled	0.0 m
RELATIVE SPEED	Drive the vehicle and FEB system ON	When the lane camera detects an object to be controlled	Displays relative velocity
		When the lane camera does not detect an object to be controlled	0.0 m/s
Distance (Cruise)	Drive the vehicle and ICC system ON	When the lane camera detects an object to be controlled	Displays distance from vehicle ahead
		When the lane camera does not detect an object to be controlled	0.0 m
Relative speed (Cruise)	Drive the vehicle and ICC system ON	When the lane camera detects an object to be controlled	Displays relative velocity
		When the lane camera does not detect an object to be controlled	0.0 m/s