Data Monitor

WARNING: This page is about a different car, the 2019 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.

Monitored item [Unit]		Description
CAMERA HIGH TEMP	(NORMAL/HIGH)	Displays status of lane camera unit high temperature judgment.
WIPER	(Off/Lo/Hi)	Displays the wiper operating status.
TURN SIGNAL	(Off/LH/ RH/LH&RH)	Displays status of "Turn signal" received from BCM via CAN communication.
VEHICLE SPEED	(km/h)	Displays vehicle speed received from ABS actuator and electric unit (control unit) via CAN communication.
DRIVER ASSIST SYSTEM SET	(NO REQ)	NOTE: The item is indicated, but not monitored.
BRAKE OPERATION STATUS	(Off/On/CNFRM/UNKWN)	Displays the brake operating status.
AIMING DONE	(not finished/finished)	Displays status that camera aiming is done.
AIMING RESULT	(NOK/OK)	Displays result of camera aiming.
STEERING ANGLE	(deg)	Displays the steering angle sent from the steering angle sensor.
YAW RATE	(deg/s)	Displays the yaw rate.
FCTRY AIM YAW	(deg)	Displays the yaw angle result of camera aiming.
FCTRY AIM ROL	(deg)	Displays the roll angle result of camera aiming.
FCTRY AIM PIT	(deg)	Displays the pitch angle result of camera aiming.
Camera yaw	(deg)	Displays the yaw angle result of camera aiming after automatic adjustment.
LDW FUNCTION	(NORMAL/MALF)	Displays LDW function status.
LDW SETTING DISPLAY	(NTHNG)	NOTE: The item is indicated, but not monitored.
DRIVER ASSIST SYSTEM BZZR	(NTHNG)	NOTE: The item is indicated, but not monitored.
Runtime aiming	(not finished/finished)	Displays the result of automatic adjustment.
Camera pitch	(deg)	Displays the pitch angle result of camera aiming after automatic adjustment.
LDW LEFT	(Off/On)	Displays the deviating status on the LH side lane.
LDW RIGHT	(Off/On)	Displays the deviating status on the RH side lane.
LDW STATUS DISPLAY	(Off/ON/TMP MF/ MF)	NOTE: The item is indicated, but not monitored.
AHL status	(AHL failure/Normal/unavailable)	Displays the status of high beam assist.
HBA FUNCTION	NOTE: The item is indicated, but not monitored.
LOW BEAM STATUS	(Off)	NOTE: The item is indicated, but not monitored.
HIGH BEAM STATUS	(Off)	NOTE: The item is indicated, but not monitored.
DISTANCE	(m)	Displays the distance between the vehicle and an object detected by the lane camera unit.
RELATIVE SPEED	(m/s)	Displays the relative velocity to an object detected by the lane camera unit.
Distance (Cruise)	(m)	Displays the distance between the vehicle and an object detected by the lane camera unit.
Relative speed (Cruise)	(m/s)	Displays the relative velocity to an object detected by the lane camera unit.