VR30DDTT engine
WARNING: This page is about a different car, the 2020 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK IGNITION RELAY [FUSE BLOCK (J/B)]
- Turn ignition switch OFF.
- Remove ignition relay [fuse block (J/B)].
- Check the continuity between ignition relay [fuse block (J/B)] terminals.
Terminals
Condition
Continuity
and
12 V direct current supply between terminals
and
Existed
No current supply
Not existed
Is the inspection result normal?
YES
INSPECTION END
NO
Replace ignition relay [fuse block (J/B)].