VR30DDTT engine

WARNING: This page is about a different car, the 2020 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.

CHECK PUSH-BUTTON IGNITION SWITCH

Turn ignition switch OFF.
Disconnect push-button ignition switch connector.

Check continuity between push-button ignition switch terminals.

Push-button ignition switch		Condition	Continuity
Terminal
4	8	Pressed	Existed
		Not pressed	Not existed

Is the inspection result normal?

YES

INSPECTION END

Replace push-button ignition switch. Refer to PUSH-BUTTON IGNITION SWITCH : Removal & Installation .