Ignition Battery Saver System
WARNING: This page is about a different car, the 2020 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
When all the following conditions are met for a period of time, the battery saver system will cut off the power supply (ignition switch ON/ACC -> OFF) to prevent battery discharge.
- Ignition switch is in the ACC or ON position
- Turn signal lamp is not in operation
- Selector lever is in the P (park) position
Reset Condition of Ignition Battery Saver System
If any of the following conditions are met, the battery saver system is released.
- Ignition switch is not in the ACC or ON position
- Turn signal lamp is in operation
- Selector lever is not in the P (park) position
NOTE:
The ignition battery saver system can be temporarily disabled, without using CONSULT, to prevent it from functioning when performing trouble diagnosis. Refer to Work Procedure .