Component Inspection
WARNING: This page is about a different car, the 2020 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK HORN RELAY 2
- Turn ignition switch OFF.
- Disconnect horn relay 2.
- Check voltage between horn relay 2 terminal and ground under the following conditions.
(+)
(-)
Condition
Voltage
Horn relay 2
Terminal
3
Ground
12 V direct current supply between terminals 1 and 2
Battery voltage
No current supply
0
Is the inspection result normal?
YES
INSPECTION END
NO
Replace horn relay 2.