Component Function Check
WARNING: This page is about a different car, the 2020 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK HAZARD SWITCH SIGNAL BY CONSULT
With CONSULT
- Turn ignition switch ON.
- Select "FLASHER" of "BCM" using CONSULT.
- Select "HAZARD SW" in "Data Monitor" mode.
- With operating the hazard switch, check the monitor status.
Monitor item
Condition
Monitor status
HAZARD SW
Hazard switch
ON
On
OFF
Off
Is the inspection result normal?
YES
Hazard switch circuit is normal.
NO
Refer to Diagnosis Procedure .