LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2017 >> Q50 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 583 (Security Control System (DTCS)) >> IPDM E/R (IPDM E/R) >> DTC B210F: Shift Position/Clutch Interlock Switch >> Confirmation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Confirmation Procedure

WARNING: This page is about a different car, the 2020 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC PRIORITY 

    If DTC B210F is displayed with DTC U1000 or U1010, first perform the trouble diagnosis for DTC U1000 or U1010.

    Is applicable DTC detected?

    YES

    Perform diagnosis of applicable. U1000: Refer to DTC Description . U1010: Refer to DTC Description .

    NO

    GO TO 2.

  2. PERFORM DTC CONFIRMATION PROCEDURE 
    1. Shift selector lever to the P position.
    2. Turn ignition switch ON and wait 1 second or more.
    3. Shift selector lever to the N position and wait 1 second or more.
    4. Shift selector lever to any position other than P and N, and wait 1 second or more.
    5. Check DTC in "Self Diagnostic Result" mode of "IPDM E/R" using CONSULT.

    Is DTC detected?

    YES

    Refer to DTC Diagnosis Procedure .

    NO

    To check malfunction symptom before repair: Refer to Inspection .

    NO

    Confirmation after repair: INSPECTION END

scientia non olet · About LEMON Manuals