 |
Drive mode select switch |
- Drive mode is selectable among PERSONAL, SPORT, and STANDARD by the operating the switch.
- Output the status of drive mode to the chassis control module.
- For detailed installation location, refer to COMPONENT LOCATION
.
|
 |
ECM |
- Transmits mainly the following signals to steering force control module via CAN communication.
- Engine status signal
- Stop/Start status signal
- Receives mainly the following signals from steering force control module via CAN communication.
- For detailed installation location, refer to COMPONENT LOCATION
.
|
 |
ABS actuator and electric unit (control unit) |
- Transmits mainly the following signals to steering force control module via CAN communication.
- Vehicle speed signal (ABS)
- For detailed installation location, refer to COMPONENT LOCATION
.
|
 |
Chassis control module |
- Transmits mainly the following signals to steering force control module via CAN communication.
- For detailed installation location, refer to COMPONENT LOCATION
.
|
 |
Combination meter
(Power steering warning lamp) |
- Transmits mainly the following signals to power steering control module via CAN communication.
- Vehicle speed signal (Meter)
- For detailed installation location, refer to COMPONENT LOCATION
.
- Turns ON the power steering warning lamp according to the signal from the power steering control module via CAN communication.
- For power steering warning lamp, refer to WARNING LAMP/INDICATOR LAMP .
|
 |
Steering angle sensor |
- Transmits mainly the following signals to power steering control module via CAN communication.
- Steering angle sensor signal
- Steering angle speed signal
- Steering angle sensor malfunction signal
- For detailed installation location, refer to COMPONENT LOCATION
.
|
 |
Power steering oil pump assembly |
Reservoir tank |
POWER STEERING OIL PUMP ASSEMBLY |
 |
Power steering motor |
 |
Power steering control module |
 |
Power steering oil pump |