Combination Switch Reading Function - Description
- BCM reads the status of the Combination Switch at 10 ms interval normally.NOTE:
BCM reads the status of the Combination Switch at 60 ms interval when BCM is controlled at low power consumption control mode.
- BCM operates as follows and judges the status of the Combination Switch.
- It operates the transistor on OUTPUT side in the following order: OUTPUT 5 → 4 → 3 → 2 → 1, and outputs voltage waveform.
- The voltage waveform of OUTPUT corresponding to the formed circuit is input into the interface on INPUT side if any (1 or more) Switches are ON.
- It reads this change of the voltage as the status signal of the Combination Switch.